{"id":4445,"date":"2024-09-16T01:58:13","date_gmt":"2024-09-16T08:58:13","guid":{"rendered":"https:\/\/gantovnik.com\/bio-tips\/?p=4445"},"modified":"2024-09-16T01:58:13","modified_gmt":"2024-09-16T08:58:13","slug":"447-command-loadsize-in-tcl-for-hypermesh","status":"publish","type":"post","link":"https:\/\/gantovnik.com\/bio-tips\/2024\/09\/447-command-loadsize-in-tcl-for-hypermesh\/","title":{"rendered":"#447 Command *loadsize in tcl for HyperMesh"},"content":{"rendered":"

This command is deprecated but can be found in old tcl scripts. It is replaced with setoption load_size_magnitude, *setoption load_size_type,\u00a0<\/em>setoption load_size_uniform<\/p>\n

*loadsize
\nSets the display size of loads.<\/p>\n

Syntax
\n*loadsize config size option scale<\/p>\n

Inputs
\nconfig
\nThe load config to set. Valid values are:
\n1 \u2013 forces
\n2 \u2013 moments
\n3 \u2013 constraints
\n4 \u2013 pressures
\n5 \u2013 temperatures
\n6 \u2013 fluxes
\n7 \u2013 (unused)
\n8 \u2013 velocities
\n9 \u2013 accelerations
\nCurrently, only constraints are independently controlled. All other configs are controlled together.
\nsize
\nThe size in model units in which the loads should be drawn. Only valid if option is set to 0.
\noption
\nFlag indicating whether to use uniform size or magnitude. Valid values are:
\n0 \u2013 Uniform size
\n1 \u2013 Magnitude
\nscale
\nThe scale of the magnitude in which the loads should be drawn. Only valid if the option is set to 1. Not valid for config 3.<\/p>\n

Examples:<\/p>\n

To set the load size for constraints to 10.0:<\/p>\n

*loadsize 3 10.0 0 0<\/p>\n

To set the load size for forces to 100% of the magnitude:<\/p>\n

*loadlabel 1 0 1 1.0<\/p>\n

To set the load size for forces to 50% of the magnitude:<\/p>\n

*loadlabel 1 0 1 0.5<\/p>\n

 <\/p>\n

 <\/p>\n","protected":false},"excerpt":{"rendered":"

This command is deprecated but can be found in old tcl scripts. It is replaced with setoption load_size_magnitude, *setoption load_size_type,\u00a0setoption load_size_uniform *loadsize Sets the display size of loads. Syntax *loadsize config size option scale Inputs config The load config to set. Valid values are: 1 \u2013 forces 2 \u2013 moments 3 \u2013 constraints 4 \u2013 […]<\/p>\n","protected":false},"author":1,"featured_media":0,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"nf_dc_page":"","_et_pb_use_builder":"","_et_pb_old_content":"","_et_gb_content_width":"","_lmt_disableupdate":"yes","_lmt_disable":"","jetpack_post_was_ever_published":false,"_jetpack_newsletter_access":"","_jetpack_dont_email_post_to_subs":false,"_jetpack_newsletter_tier_id":0,"_jetpack_memberships_contains_paywalled_content":false,"_jetpack_memberships_contains_paid_content":false,"footnotes":""},"categories":[24,27],"tags":[23,43],"class_list":["post-4445","post","type-post","status-publish","format-standard","hentry","category-hypermesh","category-tcl","tag-hypermesh","tag-tcl"],"modified_by":"gantovnik","jetpack_featured_media_url":"","jetpack_sharing_enabled":true,"jetpack_shortlink":"https:\/\/wp.me\/p8bH0k-19H","jetpack_likes_enabled":true,"jetpack-related-posts":[{"id":2108,"url":"https:\/\/gantovnik.com\/bio-tips\/2024\/01\/412-calculate-average-element-size-of-quad-and-tria-elements-using-tcl-script-in-hypermesh\/","url_meta":{"origin":4445,"position":0},"title":"#412 Calculate average element size of QUAD and TRIA elements using tcl script in HyperMesh","author":"gantovnik","date":"2024-01-19","format":false,"excerpt":"test","rel":"","context":"In "HyperMesh"","block_context":{"text":"HyperMesh","link":"https:\/\/gantovnik.com\/bio-tips\/category\/hypermesh\/"},"img":{"alt_text":"","src":"","width":0,"height":0},"classes":[]},{"id":760,"url":"https:\/\/gantovnik.com\/bio-tips\/2020\/10\/127-create-rbe3-element-using-hypermesh-tcl\/","url_meta":{"origin":4445,"position":1},"title":"#127 Create RBE3 element using tcl in HyperMesh","author":"gantovnik","date":"2020-10-29","format":false,"excerpt":"#127 Create RBE3 element using HyperMesh tcl To create an RBE3 element with dependent node 100 and independent nodes 101,102, and 103 with all of the nodes having all six degrees of freedom and a weight of 1.23 *rbe3 mark_id independent_dofs dof_size independent_weights weight_size dependent_node dof weight mark_id: The ID\u2026","rel":"","context":"In "HyperMesh"","block_context":{"text":"HyperMesh","link":"https:\/\/gantovnik.com\/bio-tips\/category\/hypermesh\/"},"img":{"alt_text":"","src":"","width":0,"height":0},"classes":[]},{"id":1290,"url":"https:\/\/gantovnik.com\/bio-tips\/2021\/12\/133-create-vectors-and-planes-using-tcl-in-hypermesh-2-2\/","url_meta":{"origin":4445,"position":2},"title":"#228 Example with *loadcreateonentity_curve","author":"gantovnik","date":"2021-12-15","format":false,"excerpt":"To apply a temperature of 140.0 to all the nodes of a set, using the curve with ID 9 to vary this magnitude over time:","rel":"","context":"In "HyperMesh"","block_context":{"text":"HyperMesh","link":"https:\/\/gantovnik.com\/bio-tips\/category\/hypermesh\/"},"img":{"alt_text":"","src":"","width":0,"height":0},"classes":[]},{"id":2188,"url":"https:\/\/gantovnik.com\/bio-tips\/2024\/05\/426-how-to-change-font-size-in-hypermesh-tcl-console\/","url_meta":{"origin":4445,"position":3},"title":"#426 How to change font size in HyperMesh tcl console","author":"gantovnik","date":"2024-05-17","format":false,"excerpt":"Font before: Font after:","rel":"","context":"In "HyperMesh"","block_context":{"text":"HyperMesh","link":"https:\/\/gantovnik.com\/bio-tips\/category\/hypermesh\/"},"img":{"alt_text":"","src":"https:\/\/i0.wp.com\/gantovnik.com\/bio-tips\/wp-content\/uploads\/2024\/05\/ex426a.jpg?resize=350%2C200&ssl=1","width":350,"height":200},"classes":[]},{"id":773,"url":"https:\/\/gantovnik.com\/bio-tips\/2020\/11\/131-use-a-panel-to-create-an-ordered-list-of-entities-for-use-in-a-subsequent-command-in-tcl-in-hypermesh\/","url_meta":{"origin":4445,"position":4},"title":"#131 Use a panel to create an ordered list of entities for use in a subsequent command in tcl in HyperMesh","author":"gantovnik","date":"2020-11-06","format":false,"excerpt":"#131 Use a panel to create an ordered list of entities for use in a subsequent command in tcl in HyperMesh To create a line from a user specified list of nodes:","rel":"","context":"In "HyperMesh"","block_context":{"text":"HyperMesh","link":"https:\/\/gantovnik.com\/bio-tips\/category\/hypermesh\/"},"img":{"alt_text":"","src":"","width":0,"height":0},"classes":[]},{"id":763,"url":"https:\/\/gantovnik.com\/bio-tips\/2020\/11\/128-moment-of-inertia-values-for-the-selected-entities-using-tcl-in-hypermesh\/","url_meta":{"origin":4445,"position":5},"title":"#128 Moment-of-inertia values for the selected entities using tcl in HyperMesh","author":"gantovnik","date":"2020-11-02","format":false,"excerpt":"#128 Moment-of-inertia values for the selected entities using tcl in HyperMesh To get the MOI for components 1-5:","rel":"","context":"In "HyperMesh"","block_context":{"text":"HyperMesh","link":"https:\/\/gantovnik.com\/bio-tips\/category\/hypermesh\/"},"img":{"alt_text":"","src":"","width":0,"height":0},"classes":[]}],"_links":{"self":[{"href":"https:\/\/gantovnik.com\/bio-tips\/wp-json\/wp\/v2\/posts\/4445","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/gantovnik.com\/bio-tips\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/gantovnik.com\/bio-tips\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/gantovnik.com\/bio-tips\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/gantovnik.com\/bio-tips\/wp-json\/wp\/v2\/comments?post=4445"}],"version-history":[{"count":1,"href":"https:\/\/gantovnik.com\/bio-tips\/wp-json\/wp\/v2\/posts\/4445\/revisions"}],"predecessor-version":[{"id":4446,"href":"https:\/\/gantovnik.com\/bio-tips\/wp-json\/wp\/v2\/posts\/4445\/revisions\/4446"}],"wp:attachment":[{"href":"https:\/\/gantovnik.com\/bio-tips\/wp-json\/wp\/v2\/media?parent=4445"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/gantovnik.com\/bio-tips\/wp-json\/wp\/v2\/categories?post=4445"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/gantovnik.com\/bio-tips\/wp-json\/wp\/v2\/tags?post=4445"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}